Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.

Wood & steel frame



Ghost Controls Gate Repair in Aliso Viejo, CA | Ironworks Gate Co.
We repair Ghost Controls gate openers across Aliso Viejo, and the work here carries a wrinkle most cities don’t have: nearly every Gate Repair in Aliso Viejo, even a hinge swap, first has to pass the local HOA’s finish and material approval. Ironworks Gate Co. is an independent Ghost Controls service provider, not a factory-authorized dealer, which means we fix what’s broken instead of steering you toward a full system replacement. Victor Salinas and our technicians have spent years working on the 1990s-era Ghost Controls installations that are now failing in waves across Aliso Viejo’s master-planned tracts. Call (442) 246-9347 and a live person answers, day or night.
Why Aliso Viejo Residents Choose Us for Ghost Controls Service
Most Aliso Viejo homes were built between 1987 and 2000 under Irvine Company master plans. That means the Ghost Controls openers installed during original construction are hitting end-of-life at roughly the same time, neighborhood by neighborhood. We’ve seen enough TSS1 and TDS2 units in Aliso Viejo to know exactly what fails first and what’s still worth repairing.
Victor Salinas grew up near the Laguna Canyon Road corridor, learned metalwork and electrical systems at Saddleback College, and has spent four decades fixing gates in actual driveways for actual neighbors. When he says a relay replacement will buy your opener another five years, that’s from doing it, not reading a spec sheet. We stock genuine Ghost Controls boards, arms, and actuators when local supply allows, and we carry aftermarket limit switches and photo eyes that meet HOA finish requirements. Quick diagnosis, straightforward pricing, and a written 90-Day Done Right Promise on every job.
Common Ghost Controls Gate Repair Problems We Solve in Aliso Viejo
- Coastal salt-air corrosion on actuator arms and limit switch terminals. Aliso Viejo sits close enough to the Pacific that marine-layer air works on exposed components year-round. Intermittent no-open/no-close faults are usually corroded terminals, not a dead motor. We clean, re-seat, and seal them with marine-grade dielectric grease.
- Santa Ana wind torque knocking swing gates off their internal stop points. The same corridors that push hot wind through Aliso Viejo in fall and early winter stress actuator limit switches. A gate that shows “slightly open” repeatedly on the HYNE Wi-Fi app usually needs a limit recalibration, not a new operator.
- Dead relays on original 1990s Ghost Controls control boards. Early TSS1 units installed during community build-out hum but never move. The relay welds shut or burns out. We replace the relay and reset limits for a fraction of a full operator swap.
- HOA-mandated dark bronze finish flaking on actuator covers. Exposed bare metal on a cover can trigger a violation letter from the community manager before any mechanical failure shows up. We match gloss black or oil-rubbed bronze and handle the color-sample approval step.
- Dual-swing gates that open one leaf but not the other. On TDS2 systems, one welded relay or corroded plug on the right-side actuator is the usual culprit. We repair the board and re-time both leaves so the gate closes square.
Ghost Controls Service in Aliso Viejo: What Local Conditions Mean for Your Equipment
Here’s the part that doesn’t show up on a generic Ghost Controls repair page. In Aliso Viejo, virtually every Ghost Controls repair, even a simple hinge swap, first requires matching the HOA’s exact gloss black or oil-rubbed bronze finish and often submitting a written color sample to the community manager before any visible component is touched. No neighboring city shares this at the same scale. A technician who installs an unpainted weld patch or a mismatched operator cover can trigger an HOA violation notice for the homeowner. Our tech responded to a TDS2 dual-swing opener on Rosy Finch Lane in the Sycamore tract that would open one leaf but not the other. The board’s right-side relay had welded shut from salt-air corrosion on the actuator plug, so we replaced the relay and applied a marine-grade dielectric grease to both connectors, then recalibrated the left leaf’s close limit after a Santa Ana wind event had nudged it off. The HOA’s approved gloss black cover kept the repair invisible enough to avoid a violation notice. That’s the Aliso Viejo playbook: mechanical fix first, finish compliance second, and the homeowner never gets a letter.
Ghost Controls Models & Products We Service in Aliso Viejo
We work on the full Ghost Controls line that shows up in Aliso Viejo driveways: the TSS1 single swing gate opener, TDS2 dual swing opener, R20 slide gate opener, and HYNE Wi-Fi smart gate opener. We use genuine Ghost Controls replacement boards, arms, and actuators when they’re available locally. When a part isn’t stocked nearby, we carry quality aftermarket limit switches and photo eyes that match HOA finish specs. Our repair-before-replace stance means most TSS1 and TDS2 units get several more years from a $150 relay and limit reset rather than a $900 complete operator swap. Motor repair, gate realignment, and battery backup installation are the three jobs we do most often on Ghost Controls equipment, alongside our Gate Installation in Aliso Viejo.
Ghost Controls Service Pricing in Aliso Viejo
Ghost Controls gate repair in Aliso Viejo typically runs $180 to $340 for a service call that includes diagnosis and a standard repair like a relay replacement or limit reset. Complete operator swaps start around $900 and go up depending on the model and whether your HOA requires a specific finish on the new housing. Battery backup installation is usually a separate line item. Every price is quoted and agreed before any work starts, and our estimate is free. Call (442) 246-9347 for an exact quote. We also have an $89 seasonal tune-up for Ghost Controls systems that just need a cleaning, lubrication, and limit check before fall wind season.
Serving Aliso Viejo, CA - Our Local Coverage Area
We’re based in the Aliso Viejo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Aliso Viejo
The most common cause is Santa Ana wind events torquing the gate off its actuator’s internal stop points, which confuses the limit switches and produces intermittent no-open/no-close faults. Corroded limit switch terminals from marine-layer salt air make the problem worse. We recalibrate limits and seal the connectors. Call (442) 246-9347 for a service visit; the fix usually takes under an hour.
Actuator arms and limit switch terminals corrode first, followed by control board relays on early 1990s TSS1 units. Photo eyes and covers typically survive longer unless an HOA finish has flaked and exposed bare metal. We stock the common failure parts so most Aliso Viejo jobs are done in one visit.
Yes. We keep gloss black and oil-rubbed bronze finish materials in the truck and we handle the written color-sample step with your community manager before any visible component is installed. This avoids violation letters and keeps the repair invisible to a fast pass.
Usually not. A click with no movement on a TSS1 or TDS2 most often means a dead relay on the control board, not a failed motor. We replace the relay and reset the limits for roughly $150 to $250 depending on the board revision. Call (442) 246-9347 if you’re hearing that click.
It does, especially during fall and early winter when Santa Ana winds knock out power in the foothills. A battery backup keeps the gate operating for a limited number of cycles so you’re not locked in or out. We install and test them as part of a standard service visit. Call (442) 246-9347 for a quote.
Service Areas Near Aliso Viejo
We also provide Ghost Controls service in Laguna Beach and Ghost Controls service in Laguna Niguel for coastal homeowners dealing with the same salt-air corrosion and wind torque issues. Our full Aliso Viejo service area extends to Laguna Woods, Ladera Ranch, and Laguna Hills. If you own a Ghost Controls opener anywhere in south Orange County, call us. For broader brand coverage, see our Ghost Controls sales & service page.
Book Your Ghost Controls Service in Aliso Viejo Today
Call (442) 246-9347 for a free estimate on any Ghost Controls repair in Aliso Viejo. A live person answers 24 hours a day, 7 days a week. Most repairs are completed in a single visit, and every job is protected by our written 90-Day Done Right Promise. We fix it right the first time, or we come back – simple as that.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Aliso Viejo since 1984.
Before
After
Before
After
Before
After